Platinum PRO Plug-in Mitsubishi EVO 9 MIVEC Kit

Platinum PRO Plug-in Mitsubishi EVO 9 MIVEC Kit

 

Product Description

Features:
 Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
 Uses the cars factory sensors
 Supports Sequential Injection (peak and hold) and Direct fire ignition
 Windows 2000, XP, Vista, Windows 7 compatible software
 Real time programming, instant hesitation free adjustment while engine is running
 Fully user definable 32 x 32 mapping
 Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF
 Diagnostic Trouble Code Storing & Check Engine Light Control
(Access through laptop only )

 Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
 Wideband _auto tuning_ using user definable target AFR table
 USB and CAN Communication Port

Factory Outputs:
 4 x Fuel Injector outputs
 2 x Ignition outputs
 Tacho , MIVEC Control, Boost Control, Intercooler Sprayer,Idle Control,
 Thermo Fan (variable speed), Fuel Pump (variable speed)
 A/C Clutch Relay, Check Engine Light

Factory Inputs:
 MAF Sensor, Throttle Position Sensor, Knock Detection Sensor
 Oxygen Sensors, Coolant Temperature Sensor, Vehicle Speed Sensor
 Air Temperature Sensor, MAP Sensor (JDM and USA Only),
 Power Steering Switch

Expansion I/O*:
 2 x Analogue Voltage inputs
 2 x Analogue Temperature inputs
 4 x Digital pulsed outputs

*Optional auxiliary harness required to be purchased Haltech Part # HT040003

Functions:
 Knock Control
 Long Term Fuel Trim
 ACF On _ Base Tables
 Closed Loop O2 Control
 Decel Cut
 Over Boost
 Closed & Open Loop Boost Control
 Gear Setup
 Transient Throttle Enhance

Correction Tables: Fuel Ignition Boost:
 Cranking
 Air Temp Target Correction
 Coolant Temperature Correction
 Map Correction
 Zero Throttle Gear Correction
 Cylinder Trim
 TPS Correction
 Generic Correction 1*
 Generic Correction 2*
 Gear Correction
 Post Start
 Air Temp Duty Correction
 Post Start

* Generic Correction tables have user definable axis

Miscellaneous:
 Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
 Max 20 channels logging capability
 Tune can be password protected in software
 Rugged anodized aluminum casing

Power Requirements:
Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC

Physical Dimensions:
ECU Dimensions Length: 154mm (174mm with MAP nipple)
Width: 158mm Height: 42mm Weight: 680g (1.5 lb)

Applications: Mitsubishi Evolution 9 / Mitsubishi Evolution 8 MR 2004 _ 2007 Engine Codes: 4G63 Transmission: Manual Only (Automatic not supported) Not Supported: Immobiliser